Abstract:The brick-and-mortar Ti₂Ni/TiNi composite, composed of Ti₂Ni bricks distributed among TiNi mortars, was successfully produced by hot rolling laminated Ti₂Ni/TiNi composite. The rolling temperature and reduction have large effects on brick width and brick interspacing, respectively. When the compression is carried out perpendicular to the stacking direction, all the samples exhibit delamination fracture, which is harmful to mechanical performances. When loading is parallel to the stacking direction, too large brick width and too small brick interspacing both boost the delamination between brittle Ti₂Ni and ductile TiNi. After 60% rolling at 700 °C, the brick-and-mortar composite exhibits a largest strength of (1923.11±70.78) MPa and a largest fracture strain of 0.190±0.017 because suitable brick width and interspacing inhibit the delamination and promote crack deflection. Further optimization of mechanical properties can be achieved by the adjustment of brick width and interspacing.

Key words: brick-and-mortar structure; TiNi; delamination; rolling