(江蘇科技大學 海洋裝備研究院增材制造研發中心，鎮江 212003)
摘 要: Al/Cu復合結構是將純Al和純Cu通過特定的機械或冶金方法結合在一起的典型的層狀雙金屬復合材料，具有導電性能優異、質輕、價格低等特性，已成為廣泛的研究熱點。本文介紹了Al/Cu復合材料金屬間化合物的種類及物理性質，闡述了界面擴散反應行為的影響因素。綜述了國內外關于Al/Cu復合材料的制備工藝及界面組織性能的研究進展，并對復合界面研究方向和采用增材制造技術制備Al/Cu復合結構的改進方向進行了展望，為Al/Cu復合結構的制備提供關鍵的理論依據和技術支撐。
關鍵字: Al/Cu復合；擴散；金屬間化合物；制備工藝；界面；激光增材制造
（Research Center of Additive Manufacturing, Marine Equipment and Technology Institute, Jiangsu University of Science and Technology, Zhenjiang 212003, China）
Abstract:Cu/Al composite structure is typical bimetallic composite material that combine pure Al and pure Cu mechanically or metallurgically by specific method. Due to the characteristics of excellent conductivity, light weight and low price, it has become the focus of extensive research. The physical properties and kinds of intermetallic compounds in Al/Cu composites were introduced, and the effect factors of interface diffusion reaction behavior were illustrated. The preparation, interface microstructure and performances of Al/Cu composite were reviewed. The research direction of composite interface and the improvement direction of Al/Cu composite structure prepared by additive manufacturing were prospected. It provides key theoretical basis and technical support for the preparation of Al/Cu composite structure.
Key words: Al/Cu composite; diffusion; intermetallic compounds; preparation technique; interface; laser additive manufacturing
