中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 32 No. 10 October 2022 |
（1. College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China;
2. Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China）
Abstract:A superhydrophobic Zn-Fe alloy coating was prepared on the surface of a reactive magnesium alloy using a simple, low-cost, eco-friendly method. Firstly, the Zn-Fe coating was obtained in a neutral glycerol Zn-Fe plating solution, which is green, compositionally stable, and non-corrosive to the equipment. And then the superhydrophobic surface with a flower-like microstructure was obtained by grafting myristic acid onto the Zn-Fe coating via a chelation reaction. The water contact angle was >150° and the rolling angle was 3°- 4°. The corrosion rate of the two groups of superhydrophobic magnesium alloy samples with electrodeposition time of 30 and 50 min, respectively, was reduced by about 87% compared to that of the bare magnesium alloy. The prepared superhydrophobic coatings exhibit high performance in self-cleaning, abrasion resistance, and corrosion resistance.
Key words: Zn-Fe coating; Mg alloy; contact angle; sliding angle; self-cleaning; abrasion resistance
