中國有色金屬學(xué)報(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 31 No. 12 December 2021 |
（1. State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072, China;
2. Key Laboratory of Metal High Performance Additive Manufacturing and Innovative Design, MIIT, Northwestern Polytechnical University, Xi’an 710072, China;
3. Xi’an Microelectronic Technology Institute, The Ninth Academy of China Aerospace Science and Technology Corporation, Xi’an 710119, China）
Abstract:The electrochemical dissolution and passivation of laser additive manufactured Ti6Al4V were investigated through Tafel polarization, potentiostatic polarization and AC impedance measurements. The results show that the solution treatment-aging (STA) process aggravates the element micro-segregation compared to the annealing process, leading to varied Al and V contents of the phases from different samples. It is proven that either Al-rich or V-rich condition can highly affect the electrochemical dissolution behaviors due to thermodynamical instability caused by element segregation. The dissolution rate in the metastable passivation process is controlled by the stability of the produced film that is affected by phases distribution, especially the difficult-to-dissolve phase. And then, the dissolution rate of the phases in the transpassivation region is consistent with the rank in the activation process because the dense film is not capable of being produced. Compared to the annealed sample, the higher dissolution rate of the STA sample is beneficial to the electrochemical machining (ECM) of Ti6Al4V.
Key words: laser additive manufacturing; electrochemical dissolution behavior; microstructure characteristic; current efficiency; Ti6Al4V alloy
