(陜西理工大學 材料科學與工程學院，漢中 723001)
摘 要: 用拉伸實驗研究經600 ℃時效1~50 h后，時效時間tag和應力-應變循環對Ti-50.8Ni-0.1Zr形狀記憶合金超彈性(SE)的影響。結果表明：600 ℃時效處理后Ti-50.8Ni-0.1Zr合金具有較高的強度和良好的塑性。隨tag延長，600 ℃時效態合金的抗拉強度Rm、斷后伸長率A、應力誘發馬氏體相變臨界應力σM和能耗ΔW降低，殘余應變?chǔ)?SUB>R先上升后下降。隨著應力-應變循環次數增加，600 ℃時效1~50 h的合金由部分非線性超彈性逐漸轉變?yōu)橥耆€(xiàn)性超彈性，ΔW和εR均逐漸降低并趨于穩定。要使600 ℃時效態Ti-50.8Ni-0.1Zr合金獲得良好的SE特性，tag應小于20 h；要使該時效態合金獲得穩定的SE特性，應對其進行不少于10次的預應力-應變循環。
關鍵字: Ti-Ni-Zr合金；時效時間；超彈性；應力-應變循環
（School of Materials Science and Engineering, Shaanxi University of Technology, Hanzhong 723001, China）
Abstract:The effects of aging time (tag) and stress-strain cycle on the superelasticity (SE) of Ti-50.8Ni-0.1Zr shape memory alloy aged at 600 ℃ for 1-50 h were investigated by the tensile test. The results show that the Ti-50.8Ni-0.1Zr alloy is of high strength and good ductility after aging treatment. The tensile strength Rm, percentage elongation A, critical stress σM for stress-induced martensite and energy dissipation ΔW of Ti-50.8Ni-0.1Zr alloy decrease gradually, while residual strain εR increases firstly and then decreases with increasing tag. With increasing stress-strain cycle number, the Ti-50.8Ni-0.1Zr alloy aged at 600 ℃ for 1-50 h transforms from incompletely nonlinear superelasticity to linear-like superelasticity, and the ΔW and εR of the alloy decrease gradually and tend to stability. In order to make 600 ℃ aged Ti-50.8Ni-0.1Zr alloy get excellent SE, the tag should be less than 20 h, and to make the alloy get stable SE, it should be subjected to a prestress-strain cycle of not less than 10 times.
Key words: Ti-Ni-Zr alloy; aging time; superelasticity; stress-strain cycling
