中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 31 No. 6 June 2021 |
（1. State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China;
2. Shenzhen Zhongjin Lingnan Nonfemet Co., Ltd., Shenzhen 518040, China;
3. School of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an 710072, China;
4. Farsoon Technologies, Changsha 410205, China;
5. State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha 410082, China）
Abstract:Creep deformation can be classified as homogeneous flow and inhomogeneous flow in bulk metallic glass (BMG). In order to understand the conversion conditions of the two types of creep deformation, the effect of loading rate on the creep behavior of a Ti40Zr10Cu47Sn3 (at.%) BMG at ambient temperature was investigated using nanoindentation and molecular dynamic simulation. Results indicate that at low loading rates, many serrations appear in loading stage, leading to inhomogeneous serrated flow in the creep stage. When the loading rate is high enough, the creep deformation tends to be homogeneous. The related mechanism responsible for the rate-dependent creep behavior is attributed to the number of pre-existing major shear bands which is influenced significantly by the loading rate.
Key words: metallic glasses; nanoindentation; loading rate; inhomogeneous creep; shear band
