中國有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 31 No. 1 January 2021 |
（1. School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094, China;
2. School of Mechanical Engineering, Southeast University, Nanjing 211189, China;
3. School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China;
4. School of Mechanical Engineering, University of Adelaide, SA 5005, Australia;
5. School of Engineering, Edith Cowan University, WA 6027, Australia）
Abstract:MnFeCoCuNix high-entropy alloys (HEAs) with different Ni contents were fabricated by vacuum induction melting. XRD and SEM-EDS were used to analyze the phase constitution and structure, and the tensile properties of the samples were determined using a universal tensile tester. The results show that the HEAs consist of a dual-phase structure, in which FCC1 phase is rich in Fe and Co, while the FCC2 phase has high contents of Cu and Mn. As Ni content increases, the segregation of Cu decreases, accompanied by the decrease of FCC2 phase. Moreover, the tensile strength of the HEAs increases first and then decreases, and the elongation increases slightly. This is attributed to the combined effect of interface strengthening and solid solution strengthening. The in-situ stretched MnFeCoCuNi0.5 alloy shows obvious neck shrinkage during the tensile fracture process. In the initial deformation stage, the slip lines show different morphologies in the dual-phase structure. However, in the later stage, the surface slip lines become longer and denser due to the redistribution of atoms and the re-separation of the dissolved phase.
Key words: high-entropy alloys; dual-phase structure; mechanical properties; in-situ stretching；fracture mechanism
