中國有色金屬學報(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 30 No. 10 October 2020 |
（1. Shandong Provincial Key Laboratory of Special Welding Technology, Harbin Institute of Technology at Weihai, Weihai 264209, China;
2. State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China）
Abstract:Cu75Pt25 brazing filler was applied to brazing GH99 superalloy to Nb, and the sound joints were obtained by adjusting brazing parameters. The typical interfacial microstructure of the brazed joint was Nb/Nb7Ni6+NbNi3/ Ni(s,s)+Cr-rich NbNi3+(NbCr2+NbNi3)/GH99. The effects of brazing temperature and holding time on the interfacial microstructure of GH99/Cu75Pt25/Nb joints were studied. The results showed that the solution and diffusion of Ni atoms from GH99 substrate into brazing seam played a critical role in the interfacial microstructure evolution. As the brazing temperature rose, the Nb-Ni reaction layer was formed instead of the initial Nb3Pt layer, and the thickness increased firstly and then remained constant. The highest shear strength of the joint reached 152 MPa when brazed at 1150 °C for 15 min. All of the joints presented a brittle fracture mode during shear test, and the fracture location changed from Nb3Pt layer to Nb-Ni compounds layer.
Key words: nickel-based superalloy; Nb; Cu75Pt25 filler; brazing; microstructure; mechanical properties
