中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 23 No. 3 March 2013 |
（1. Paavaai Group of Institutions-Integrated Campus, School of Engineering, NH-7,
Paavai Vidhya Nagar, R. Puliyampatti, Puduchatram (Post) Namakkal – 637 018, Tamil Nadu, India;
2. Centre for Materials Joining and Research (CEMAJOR), Department of Manufacturing Engineering,Annamalai University, Annamalai Nagar – 608 002, Tamil Nadu, India）
Abstract:A356 is a high strength aluminium-silicon cast alloy used in food, chemical, marine, electrical and automotive industries. Fusion welding of this cast alloy will lead to many problems such as porosity, micro-fissuring, and hot cracking. However, friction stir welding (FSW) can be used to weld this cast alloy without above mentioned defects. An attempt was made to study the effect of FSW process parameters on the tensile strength of cast A356 aluminium alloy. Joints were made using different combinations of tool rotation speed, welding speed and axial force. The quality of weld zone was analyzed by macrostructure and microstructure analyses. Tensile strengths of the joints were evaluated and correlated with the weld zone hardness and microstructure. The joint fabricated using a rotational speed of 1000 r/min, a welding speed of 75 mm/min and an axial force of 5 kN showed a higher tensile strength compared to the other joints.
Key words: A356 aluminium alloy; friction stir welding; tool rotation speed; welding speed; axial force; tensile strength
