中國有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 30 No. 7 July 2020 |
（Shaanxi Province Key Laboratory for Electrical Materials and Infiltration Technology, School of Materials Science and Engineering, Xi’an University of Technology, Xi’an 710048, China）
Abstract:In situ TiB2/Cu composites were fabricated by both solid-liquid (S-L) and liquid-liquid (L-L) reactive spray deposition in combination with cold rolling and annealing. The microstructure and properties of the fabricated TiB2/Cu composites were investigated. The results show that the reactive mode and rolling treatment are the main factors affecting the microstructure and properties of the TiB2/Cu composite. The in situ reaction in the L-L reaction can be carried out more completely. By controlling the rolling and annealing process, the relative density and the properties of the as-deposited composites are optimized. The comprehensive performance of the deformed TiB2/Cu composite prepared by L-L reactive spray deposition (401 MPa and 83.5% IACS) is better than that by S-L reactive spray deposition (520 MPa and 20.2% IACS).
Key words: in situ TiB2/Cu composite; reactive spray deposition; electrical conductivity; tensile strength
