Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首頁 - 期刊簡介 - 詳細頁面

中國有色金屬學報

ZHONGGUO YOUSEJINSHU XUEBAO

第30卷    第4期    總第253期    2020年4月

[PDF全文下載]        

    

文章編號:1004-0609(2020)-04-0951-09
尾砂膠結充填料漿剪切觸變實驗及其基于量綱分析的觸變性預測模型
張友志1,甘德清1,陳 勛2,薛振林1,任偉成1

(1. 華北理工大學 礦業工程學院,唐山 063210;
2. 北京科技大學 土木與資源工程學院,北京 100083
)

摘 要: 采用槳式流變儀研究了不同質量濃度、灰砂比充填料漿在剪切條件下的觸變行為,借助量綱齊次性原理,推導并提出了基于量綱分析的觸變性預測模型。結果表明:濃度不同的料漿在觸變形態上有差異,高濃度料漿剪切應力的波動性更強;觸變性與質量濃度和灰砂比均呈非線性正相關,且水泥比尾砂更能引發觸變;剪切過程中,表觀黏度先急速下降,然后維持平穩,最后急劇上升,但結束瞬間的最終值小于初始值;質量濃度為64%的料漿剪切應力在剪切速率轉折點前呈不規則“U”字型,其他組剪切應力基本以剪切速率轉折點為中心左右對稱。設計實驗對預測模型進行驗證,結果顯示平均誤差率為6.2%,且適應性良好。

 

關鍵字: 充填料漿;剪切;觸變行為;量綱;預測模型

Experiment of shear thixotropy of cemented tailings filling slurry and its prediction model based on dimensional analysis
ZHANG You-zhi1, GAN De-qing1, CHEN Xun2, XUE Zhen-lin1, REN Wei-cheng1

1. College of Mining Engineering, North China University of Science and Technology, Tangshan 063210, China;
2.School of Civil and Environmental Engineering, University of Science and Technology Beijing, Beijing 100083, China

Abstract:The thixotropic behavior of filling slurry with different concentration and cement-sand ratio was studied by paddle rheometer. The thixotropy prediction model based on dimensional analysis was proposed. The results show that the thixotropic morphologies of slurry with different concentration are different, and the shear stress of slurry with high concentration is more fluctuating. The thixotropy is positively correlated with concentration and cement-sand ratio, and the cement can induce thixotropy more than tailings. During the shear process, the apparent viscosity first decreases rapidly, then maintains stable, and finally rises sharply, but the final value is less than the initial value. The shear stress of the slurry with mass concentration of 64% presents an irregular “U” shape before the turning point while the other groups, however, are basically symmetric around the turning point. The experiments are designed to verify the prediction model, and the results show that the average error rate is 6.2%, with good adaptability.

 

Key words: filling slurry; shear; thixotropic behavior; dimensional; prediction model

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中國科學技術協會 主辦:中國有色金屬學會 承辦:中南大學
湘ICP備09001153號 版權所有:《中國有色金屬學報》編輯部
------------------------------------------------------------------------------------------
地 址:湖南省長沙市岳麓山中南大學內 郵編:410083
電 話:0731-88876765,88877197,88830410   傳真:0731-88877197   電子郵箱:f_ysxb@163.com  
江门市| 周口市| 赣榆县| 麻江县| 崇义县| 八宿县| 泊头市| 西盟| 东方市| 阳山县| 宁津县| 辽宁省| 新沂市| 和龙市| 文昌市| 镇巴县| 青田县| 区。| 都江堰市| 湄潭县| 泸水县| 临清市| 内丘县| 三穗县| 密云县| 即墨市| 方正县| 凭祥市| 即墨市| 德兴市| 乌兰县| 金溪县| 肥乡县| 浦东新区| 宁南县| 丰台区| 诏安县| 北流市| 班戈县| 扎赉特旗| 光山县|