中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 29 No. 11 November 2019 |
（1. Research Institute for Energy Equipment Materials, School of Materials Science and Engineering,Hebei University of Technology, Tianjin 300132, China;
2. Tianjin Key Laboratory of Materials Laminating Fabrication and Interface Control Technology,
Tianjin 300132, China）
Abstract:The Al0.3CoCrFeNi high-entropy alloy (HEA) particles reinforced Cu matrix composites (CMCs) were fabricated by mechanical alloying and sintering. Transition layer structure was obtained by multi-step ball milling to investigate the related influence on element diffusion behavior and wear properties of CMCs. The results indicate that a new Cu transition layer is generated, and the thickness is about 5 μm. Cr element diffuses into the interface via the transition layer, which forms the complex oxide. Because of the structure of Cu transition layer, the diffusion rates of Ni, Co and Fe increase, especially the Ni element. The wear resistance of CMCs is improved by 30%, which is due to the improvement of interface bonding strength, compared with the CMCs without transition layer. This method is applicable to the development of advanced HEA reinforced metallic matrix composites.
Key words: high-entropy alloy; copper-matrix composites; transition layer structure; diffusion; wear
