中國有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 28 No. 12 December 2018 |
（1. School of Chemistry and Chemical Engineering, Central South University, Changsha 410083, China;
2. Hunan Provincial Key Laboratory of Efficient and Clean Utilization of Manganese Resources, Central South University, Changsha 410083, China）
Abstract:A novel silica-supported tert-butyl 2-picolyamino-N-acetate chelating resin (Si-AMPY-1) was successfully synthesized and characterized by elemental analysis, FT-IR, SEM and 13C CP/MAS NMR. The adsorption behaviors of the Si-AMPY-1 resin for Cu(II) and Ni(II) were studied with batch and column methods. The batch experiments indicated that the Si-AMPY-1 resin adsorbed Ni(II) mainly via physisorption, while adsorbed Cu(II) via chemisorption. The column dynamic breakthrough curves revealed that the Si-AMPY-1 resin can efficiently separate Cu(II) from the simulated nickel electrolyte before the breakthrough point. Moreover, the concentration of Cu(II) in the column effluent was decreased to be less than 3 mg/L within the first 43 BV (bed volumes), and the mass ratio of Cu/Ni was 21:1 in the saturated resin, which completely satisfied the industrial requirements of the nickel electrorefining process. Therefore, it was concluded that the Si-AMPY-1 resin can be a promising candidate for the deep removal of Cu(II) from the nickel electrolyte.
Key words: chelating resin; selective adsorption; copper removal; simulated nickel electrolyte; synthesis
