中國有色金屬學(xué)報(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 28 No. 11 November 2018 |
（1. School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China;
2. State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, China）
Abstract:The equi-biaxial tensile test is often required for parameter identification of anisotropic yield function and it demands the special testing technique or device. Instead of the equi-biaxial tensile test, the plane strain test carried out with the traditional uniaxial testing machine is suggested to provide the experimental data for calibration of anisotropic yield function. This simplified method by using plane strain test was adopted to identify the parameters of Yld2000-2d yield function for 5xxx aluminum alloy and AlMgSi alloy sheets. The predicted results of yield stresses, anisotropic coefficients and yield loci by the proposed method were very similar with the experimental data and those by the equi-biaxial tensile test. It is validated that the plane strain test is effective to provide experimental data instead of equi-biaxial tensile test for calibration of Yld2000-2d yield function.
Key words: aluminum alloy sheet; anisotropic behavior; yield function; parameter identification; plane strain test
