(中南大學 冶金與環境學院，長沙 410083)
摘 要: 采用獨居石對工業硫酸鋅溶液進行吸附脫氟，研究吸附時間、吸附溫度、吸附劑添加量、pH等工藝參數對脫氟效果的影響，分析其吸附動力學及等溫線特征，初步探討?yīng)毦邮拿摲鷻C(jī)理。結果表明：獨居石中的鈰與工業硫酸鋅溶液中氟的相互作用使氟得以脫除；采用獨居石吸附脫氟符合偽一級動力學模型和Langmuir吸附等溫線模型，其最大理論吸附容量可達5.29 mg/g；當工業硫酸鋅溶液在溫度70 ℃、吸附時間65 min、添加量為25 g/L、pH值為1時，氟的脫除率可達到46.06%，具有良好的脫氟效果。
關鍵字: 獨居石；工業硫酸鋅溶液；脫氟
（School of Metallurgy and Environment, Central South University, Changsha 410083, China）
Abstract:Monazite was employed to remove fluorine ions from industrial zinc sulfate solution. The different process parameters, such as adsorption time, adsorption temperature, dosage of adsorbent and pH, were studied. Kinetic and adsorption isotherm characteristics was analyzed and the mechanism of defluorination on monazite was explored preliminarily. The results indicate that fluorine ions are removed by interacting with equilibrium concentration on the surface of monazite. The kinetics data suggests that the process of adsorption can be described by the pseudo-first order kinetic model. The isotherm data are well fitted to the Langmuir isotherm models and the theoretical maximum adsorption capacity is 5.29 mg/g. It is the most efficient when the conditions are as follows: t=65 min, θ=70 ℃, ρ=25 g/L, pH=1. And under this condition, the efficiency can reach up to 46.06%.
Key words: Monazite; industrial zinc sulfate solution; defluorination
