(1. 華北理工大學 礦業工程學院，唐山 063009；
2. 華北理工大學 河北省礦業開發與安全重點實驗室，唐山 063009)
摘 要: 采用單因素浸出試驗對含鋅塵泥中鋅的浸出動力學進行研究，并探討硫酸濃度、液固比、攪拌速度、反應溫度等因素對鋅浸出率的影響。結果表明：在硫酸濃度為0.5 mol/L，液固比為6:1(mL:g)，攪拌速度為300 r/min，反應時間40 min的條件下，鋅的最終浸出率達到96.30%；含鋅冶金塵泥在硫酸體系中鋅的浸出過程符合n=0.16的Avrami動力學模型，浸出反應表觀活化能為10 kJ/mol，表明整個浸出過程受邊界層擴散控制。采用SEM、XRD及EDS表征含鋅塵泥原料以及浸出渣的結構和形貌，結果表明絕大部分鋅被浸出，而鐵、硅、碳等元素則被留在浸出渣中。
關鍵字: 含鋅塵泥；鋅；酸浸；浸出動力學
（1. College of Mining Engineering, North China University of Science and Technology, Tangshan 063009, China;
2. Hebei Province Mining Industry Develops with Safe Technology Priority Laboratory, Tangshan 063009, China）
Abstract:A novel method for leaching zinc from low grade zinc-bearing dust in sulfuric acid solutions was proposed by single factor leaching experiment. The influences of sulfuric acid concentration, liquid-solid ratio, stirring speed and leaching temperature on the zinc extraction were discussed. The results show that, under the conditions that sulfuric acid concentration of 0.5 mol/L, liquid-solid ratio of 6 mL:1 g, stirring speed of 300 r/min and leaching time of 40 min, the zinc extraction reaches 96.30%. The results of leaching kinetics indicates that the leaching process is controlled by the interface transfer and diffusion through the product layer. And when n is 0.16, the gas mud acid leaching process is in accordance with Avrami dynamic model, the apparent activation energy is 10 kJ/mol. Using SEM, XRD and EDS, the characterization of zinc-bearing dust raw materials and the structure and morphology of leaching residue were studied. The results show that most of zinc is leached, iron, silicon, carbon and other elements are in the leaching residue.
Key words: zinc-bearing dust; zinc; acid leaching; leaching kinetics
