(1. 貴州大學 機械工程學院，貴陽 550025； 2. 華南理工大學 國家金屬材料近凈成形工程技術研究中心，廣州 510640)
摘 要: 通過分析機械球磨Al/TiO2/TiC復合粉末的放熱反應及原位合成動力學，確定Ti3AlC2/Al2O3/TiAl3復合材料的合成路徑。在此基礎上，結合球磨后復合粉末的微觀形貌和物相演變分析，提出復合材料的原位合成機理。結果表明：復合材料原位合成過程中存在中間產物TiO和TiCx；機械球磨形成的“核殼結構”對原位合成組織細小均勻的Ti3AlC2/Al2O3/TiAl3復合材料至關重要。
關鍵字: 原位反應；動力學；Ti3AlC2/Al2O3/TiAl3復合材料；合成機理
（1. School of Mechanical Engineering, Guizhou University, Guiyang 550025, China; 2. National Engineering Research Center of Near-Net-Shape Forming for Metallic Materials, South China University of Technology, Guangzhou 510640, China）
Abstract:Through analyzing the exothermic reaction and in-situ synthesis kinetics of milled Al/TiO2/TiC powder mixture, the synthesis path of Ti3AlC2/Al2O3/TiAl3 composite was proposed. Furthermore, the in-situ synthesis mechanism of composite was proposed combining with investigation on morphology and phase transformation of milled powder mixture. The results show that TiO and TiCx are found to be the transitional phase, and the core/shell microstructure obtained by mechanical milling is essential for in-situ reaction synthesis of Ti3AlC2/Al2O3/TiAl3 composite with uniform fine microstructure.
Key words: in-situ reaction; kinetic; Ti3AlC2/Al2O3/TiAl3 composite; synthesis mechanism
