(1. 中南大學 輕合金研究院，長沙 410083； 2. 中南大學 材料科學與工程學院，長沙 410083； 3. 中南大學 有色金屬先進結構材料與制造協同創新中心，長沙 410083)
摘 要: 采用電導率實驗與慢應變速率拉伸實驗研究自然時效對Al-Zn-Mg合金型材應力腐蝕斷裂的影響，通過掃描電鏡、透射電鏡等顯微組織分析揭示其性能變化的機理。結果表明：Al-Zn-Mg合金型材的電導率隨著自然時效時間的延長呈下降趨勢，停放至28 d左右基本達到穩定狀態，穩定后合金的內、外表層電導率分別為32.20(IACS)%與31.50(IACS)%。自然時效后再進行人工時效((90 ℃, 12 h)+(169 ℃, 11 h))，Al-Zn-Mg合金型材的抗拉強度(Rm)隨自然時效時間的延長而顯著降低，但合金的抗應力腐蝕性能明顯提高；自然時效后，合金內晶界無沉淀析出帶變寬(PFZ)，晶界析出相尺寸與間距變大。
關鍵字: Al-Zn-Mg合金型材；自然時效；電導率；力學性能；應力腐蝕性能
（1. Light Alloy Research Institute, Central South University, Changsha 410083, China; 2. School of Material Science and Engineering, Central South University, Changsha 410083, China; 3. Nonferrous Metal Oriented Advanced Structural Materials and Manufacturing Cooperative Innovation Center, Central South University, Changsha 410083, China）
Abstract:The effect of natural aging time on stress corrosion cracking of aluminum alloy was investigated by means of electrical conductivity and slow rate tension testing (SSRT). The changing mechanism was analyzed by scanning electron microcopy (SEM) and transmission electron microcopy (TEM). The results show that the electrical conductivity of alloy decreases during natural aging time at room temperature and reaches a stable value after natural aging about 28 d. The electrical conductivities of different surfaces of alloy are 32.2(IACS)% and 31.5(IACS)%, respectively. The stress corrosion cracking resistance can be improved after natural aging time at room temperature. The strength decreases sharply. The grain boundary precipitates distribute coarsely and sparsely after natural aging time about 28 d. The precipitate free zone (PFZ) width becomes broaden, and the alloy possesses the best resistance to SCC.
Key words: Al-Zn-Mg aluminum alloy; room temperature parking; electrical conductivity; mechanical property; stress corrosion cracking
