中國有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 27 No. 4 April 2017 |
（1. School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China;
2. National Key Laboratory for Precision Hot Processing of Metals, Harbin Institute of Technology, Harbin 150001, China）
Abstract:The influence of Mo content on the microstructure and mechanical properties of the Ti-45Al-5Nb-xMo-0.3Y (x=0.6, 0.8, 1.0, 1.2) alloys was studied using small ingots produced by non-consumable electrode argon arc melting. The results show that small quantities of β phase are distributed along γ/α2 lamellar colony boundaries as discontinuous network in the TiAl alloys owing to the segregation of Mo element. The γ phase forms in the interdentritic microsegregation area when the Mo addition exceeds 0.8%. The β and γ phases can be eliminated effectively by subsequent homogenization heat treatment at the temperature above Tα. The evolution of the strength, microhardness and ductility at different Mo contents under as-cast and as-homogenization treated conditions was analyzed, indicating that excessive Mo addition is prone to cause the microsegregation, thus decreasing the strength and microhardness obviously, which can be improved effectively by subsequent homogenization heat treatment.
Key words: TiAl alloy; β phase; microstructure; mechanical properties; homogenization treatment
