(1. 吉林大學 材料科學與工程學院 教育部汽車材料重點實驗室，長春 130025；
2. 吉林科爾物流涂裝設備有限公司，長春 130000)
摘 要: 研究電鑄鎳層的微觀結構和表面氧化膜的形成、硫酸酸蝕去除氧化膜的過程及其對非連續電鑄后鎳層結合致密度的影響。利用X射線衍射儀(XRD)和掃描電鏡(SEM)對電鑄鎳層的微觀結構進行表征，利用能譜儀(EDS)和高精度電子天平研究鎳層表面氧元素含量，采用掃描電鏡觀測二次電鑄后鎳層間結合致密度。結果表明：電鑄鎳層具有明顯的(100)晶面擇優取向，120 min后，鎳層表面基本氧化完全；氧化膜隨著硫酸酸蝕時間的增加而不斷損失，10%質量分?jǐn)?shù)的硫酸酸蝕60 min可以除去氧化完全的鎳層表面的氧化膜，非連續電鑄所得雙層鎳層之間結合致密。
關鍵字: 電鑄鎳；氧化膜；酸蝕；非連續電鑄
（1. Key Laboratory of Automobile Materials of Ministry of Education, Department of Materials Science & Engineering, Jilin University, Changchun 130025, China;
2. Jilin Core Technology Co. LTD, Changchun 130000, China）
Abstract:The formation of oxide film on the nickel surface and the effect of sulfuric acid erosion on the remain of the oxide film and the binding densification between two electroformed nickel layers were investigated. The microstructure of electroformed nickel layer was characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The oxygen content on the surface of the nickel layer was characterized by energy dispersive spectroscopy (EDS) and high precision electronic scale, the binding density between two electroformed nickel layers was observed by SEM. The results show that the electroformed nickel crystal orientation prefers (100), the electroformed nickel is substantially oxidized after 120 min. The oxide film decreases with the increase of the etching time, and disappears completely after etched in 10% (mass fraction) sulfuric acid for 60 min, and the two nickel layers combine densely.
Key words: electroformed nickel; oxide film; etching; discontinuous electroforming
