(1. 南昌大學 材料科學與工程學院，南昌 330031；
2. 南昌大學 江西省高性能精確成形重點實驗室，南昌 330031)
摘 要: 采用水冷銅模吸鑄法制備內生β-Ti晶體相增塑Ti48Zr18V12Cu5Be17塊體非晶復合材料，研究該材料在半固態溫度區間的顯微組織演變及其動力學。結果表明：水冷銅模吸鑄的鑄態組織和半固態等溫處理后的水淬組織均由β-Ti晶體相和基體非晶相組成。半固態等溫處理溫度和保溫時間決定著β-Ti相的最終形態，提高等溫處理溫度將提高β-Ti相的演變速度。β-Ti相晶粒尺寸D3和保溫時間t存在線性關系，生長動力學因子K=3.6 μm3/s，β-Ti相的球化過程是由溶質元素?cái)U(kuò)散控制的粗化行為。
關鍵字: 非晶基復合材料；半固態；水冷銅模；顯微組織
（1. School of Materials Science and Engineering, Nanchang University, Nanchang 330031, China;
2. Key Lab of Near-Net Forming in Jiangxi Province, Nanchang University, Nanchang 330031, China）
Abstract:The Ti48Zr18V12Cu5Be17 in-situ bulk metallic glass matrix composite (BMGC) was prepared by copper mould suction process, and the evolution of microstructure of this kind of Ti based BMGC at semi-solid stage was investigated. The results show that microstructures of billets, produced by copper mould suction and water quenching after isothermal holding at semi-solid stage, mainly contain β-Ti phase and glass matrix. Isothermal holding temperature and time interval determine the final morphology of β-Ti phase, and the increasing of isothermal holding temperature increases microstructure evolution rate. A linear relationship between the cube grain size of β-Ti phase and isothermal holding time is found, and the value of coarsening rate is 3.6 μm3/s.
Key words: metallic glass matrix composite; semi-solid state; copper mould suction; microstructure
