(1. 江西理工大學材料科學與工程學院，贛州 341000；
2. 江西理工大學機電工程學院，贛州 341000)
摘 要: 利用Fluent軟件主要研究半固態A356稀土合金熔體在施加電磁攪拌后的溫度場分布規律以及電磁場對半固態A356稀土合金熔體中初生α相形貌演變的影響。結果表明：在電磁攪拌相同時間(15 s)、不同頻率下，熔體在40 Hz時的溫度場較5 Hz、15 Hz和30 Hz時的分布更加均勻；半固態A356-Yb合金熔體經620 ℃澆注，在電流頻率30 Hz時攪拌15 s，并在590 ℃保溫10 min，初生相的平均等積圓直徑為62.3 μm，平均形狀因子為0.78，此時，晶粒最圓整細小，組織形貌最佳。
關鍵字: 半固態；A356稀土合金；電磁攪拌；初生α相；溫度場分布
（1. School of Material Science and Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China;
2. School of Mechanical and Electronic Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China）
Abstract:The temperature field distribution of semisolid A356 alloy melt by the computational fluid dynamics software Fluent, and the effect of electromagnetic on the morphology of primary α phase of semisolid A356 alloy melt were mainly investigated. The results show that the temperature field distribution of alloy melt at 40 Hz is more uniform than those at 5 Hz, 15 Hz and 30 Hz at the same time. The average equal-area circle diameter and average shape factor of primary phase are 62.3 μm and 0.78, respectively, after semisolid A356 alloy is pouring at 620 ℃, stirring for 15 s at 30 Hz, and holding at 590 ℃for 10 min. Meanwhile, the smallest size and the best primary phase can be observed.
Key words: semisolid; A356 aluminum-RE alloy; electromagnetic stirring; primary α phase; temperature field distribution
