中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 25 No. 11 November 2015 |
（1. Polymers and Pigments Department,National Research Centre,
33 El Bohouth St. Dokki, Giza, P.O. 12622, Egypt;
2. Spectroscopy Department, Physics Division,National Research Centre,
33 El Bohouth St. Dokki, Giza, P. O. 12622, Egypt）
Abstract:Poly(p-phenylenediamine)/chitosan (PPPDA/Chi) composite was prepared by in situ chemical oxidative polymerization of p-phenylenediamine (PPPDA) into chitosan (Chi) using ammonium persulphate (APS) as an oxidant. PPPDA and PPPDA/Chi composite were characterized by FT-IR spectra and SEM before and after copper loading. In batch adsorption method, the maximum removal of copper was experienced when 1 g/L of PPPDA and PPPDA/Chi composite dosages were used at pH 5.0 for PPPDA and 6.0 for PPPDA/Chi composite for 360 min for both sorbents. PPPDA showed adsorption capacity qemaxof 650 mg/g whereas its composite achieved qemaxof 573 mg/g. The experimental data correlate well with the Freundlich isotherm equation and the pseudo-second order kinetic model. The Cu(II), loaded PPPDA and its composite can be efficiently reused for as many as four cycles. The Cu(II)-loaded sorbents showed high antibacterial efficiency against Gram-positive and Gram-negative bacteria than their unloaded forms.
Key words: copper removal;adsorption;poly(p-phenylenediamine)/chitosan composite;kinetics;isotherms
