中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 25 No. 11 November 2015 |
（1. Department of Mechanical Engineering, SKP Institute of Technology, Tiruvannamalai, Tamilnadu 606611, India;
2. RMK College of Engineering and Technology, Tiruvallur, Tamilnadu 601206, India）
Abstract:A method to decide near optimal settings of the process parameters in friction welding was proposed. The success of the friction welding process is based on various input parameters like friction pressure, friction time, upset pressure and upset time and output parameters like tensile strength, hardness and material loss. Ti-6Al-4V and SS304L(SS) materials were joined by friction welding process using interlayer techniques. The Box-Behnken design and response surface methodology (RSM) were applied to deciding the number of experiments to be performed and identify the optimum process parameters for obtaining better joint strength. The results were highly encouraging. Join strength of 523 MPa was obtained at a friction pressure of 12 N/mm2, upset pressure of 40 N/mm2, friction time of 1.2 s and upset time of 7 s.
Key words: friction welding; welding parameters; Ti-6Al-4V; SS304L; copper interlayer
