(1. 東北大學材料與冶金學院，沈陽 110819；
2. 上海空間推進研究所，上海201112；
3. 東北大學材料各向異性與織構教育部重點實驗室，沈陽 110819)
摘 要: 研究溫度、保溫時間及拉伸速度對半連續鑄造Al-13.7Si合金高溫力學性能和顯微組織的影響。結果表明：半連續鑄造Al-13.7Si合金在450℃拉伸時伸長率達到85.34%；Al-13.7Si合金表現出較高的高溫塑性主要是由整個鋁基體向細化的等軸晶轉變引起的；Al-13.7Si合金適宜的熱變形溫度為450~500 ℃；當熱變形溫度高于450 ℃時，隨著溫度的升高或保溫時間的延長，合金的伸長率和抗拉強度均呈下降趨勢；隨著拉伸速度的降低，各溫度下合金的抗拉強度下降，而伸長率呈上升趨勢。
關鍵字: 鋁硅合金；高溫力學性能；組織演變；過共晶
（1. School of Materials and Metallurgy, Northeastern University, Shenyang 110819, China;
2. Shanghai Institute of Space Propulsion, Shanghai 201112, China;
3. Key Laboratory for Anisotropy and Texture of Materials, Ministry of Education,
Northeastern University, Shenyang 110819, China）
Abstract:The high-temperature mechanical properties and microstructure of DC cast hypereutectic Al-13.7Si alloy were investigated at different temperatures, holding time and tensile velocities. The results show that the elongation of Al-13.7Si alloy is 85.43% at 450℃. Excellent ductility of the studied alloy at high temperature is due to the transformation of fine equiaxed grains in the whole Al matrix. The suitable hot deformed temperature of Al-13.7Si alloy is from 450 ℃ to 500 ℃. When the temperature of tensile is higher than 450 ℃, with increasing the temperature or prolonging the holding time, the elongation and tensile strength of the Al-13.7Si alloy decrease. With decreasing the tensile velocity, the tensile strength decreases while the elongation of the Al-13.7Si alloy increases.
Key words: Al-Si alloy; high temperature mechanical property; microstructure evolution; hypereutectic
