(1. 湘潭大學 機械工程學院，湘潭 411105；
2. 上海理工大學 材料科學與工程學院，上海 200093)
摘 要: 利用高剪切壓電系數，設計并制作并聯結構d15模式PZT-51懸臂梁裝置，測量其在不同負載電阻下輸出峰-峰值電壓和輸出功率隨頻率變化的關系以及不同負載電阻下共振瞬時輸出電壓和振動激勵電壓與輸出峰-峰值電壓關系。當頻率為96 Hz、負載電阻為100 kΩ時，該PZT-51懸臂梁裝置的輸出峰-峰值電壓最大值為1.96 V，輸出功率達到最大為19.21 μW。隨著振動激勵電壓的增大，并聯結構d15模式PZT-51懸臂梁裝置的輸出峰-峰值電壓隨之增大，并聯結構d15模式PZT-51懸臂梁俘能特性的研究可為設計d15模式壓電俘能器提供指導。
關鍵字: PZT-51陶瓷；懸臂梁；d15模式；并聯；剪切壓電系數
（1. School of Mechanical Engineering, Xiangtan University, Xiangtan 411105, China;
2. School of Materials Science and Engineering, University of Shanghai for Science and Technology,
Shanghai 200093, China）
Abstract:Utilizing the high shear piezoelectric coefficient of PZT-51 ceramic, the parallel connection device of d15 mode PZT-51 cantilever beam was designed and fabricated. The dependences of output peak-to-peak voltage and output power on frequency were studied at various load resistances. The dependence of peak-to-peak voltage on excitation voltage and the resonance transient output voltage were measured at various load resistances. Maximum output peak-to-peak voltage of 1.96 V and maximum output power of 19.21 μW for PEH with load resistance of 100 kΩ are obtained at frequency of 96 Hz. With increasing vibration excitation voltage, the output peak-to-peak voltage of PEH increases. The proposed structure will provide useful guidelines for the design of d15 mode piezoelectric energy harvesters.
Key words: PZT-51 ceramic; cantilever; d15 mode; parallel connection; shear piezoelectric coefficient
