(1. 武漢理工大學 材料科學與工程學院，武漢 430070；
2. 武漢山力板帶技術工程有限公司 工程管理，武漢 430074)
摘 要: 針對Ag-Cu-Zn-Sn系多元金屬混合粉料制備無鎘中溫銀基釬料進行研究，探索壓坯密度與壓制壓力、壓制模量及壓制速率的關系。采取理論分析、工藝實驗和軟件擬合曲線相結合的方法，構建了電磁壓制條件下的高速率壓型方程，為電磁壓制工藝的數(shù)值模擬分析提供數(shù)學模型和相應的參數(shù)，提高數(shù)值仿真的準確性和可靠性。該結果為Ag-Cu-Zn-Sn系多元金屬混合粉料進行合理的電磁壓制工藝設計提供一定的理論價值和工程實踐指導 意義。
關鍵字: 電磁壓制；金屬粉末；壓型方程；壓坯密度
（1. School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China;
2. Wuhan Sunny Strip Processing Technology Engineering Co., Ltd., Engineering Management, Wuhan 430074, China）
Abstract:The multivariate mixed Ag-Cu-Zn-Sn metal powder used in the preparation of cadmium-free silver-based intermediate temperature filler metal was investigated. The relationships among pressed compact density and the pressing pressure, pressing modulus and suppression rate were explored. Through the combination of theoretical analysis, experiments and software fitting curve research methods, the high rate pressure type equations under the conditions of electromagnetic compaction were built. A mathematical model and corresponding parameters for numerical analysis of electromagnetic compaction process are provided, the accuracy and reliability of the numerical simulation are improved. The results provide theoretical value and practical significance of engineering for designing the electromagnetic compaction process of the multivariate mixed metal powder in the Ag-Cu-Zn-Sn system.
Key words: electromagnetic compaction; metal powder; forming equation; pressed compact density
