(1. 山東大學 材料科學與工程學院，濟南 250061；
2. 濟南寶世達實業發展有限公司，濟南 250061)
摘 要: 利用光學顯微鏡和X射線衍射儀表征TAg0.1銅銀合金的顯微組織，采用顯微硬度計、電子萬能試驗機、電導率測量?jī)x等設備研究TAg0.1合金的力學性能及電學性能，系統分析銅銀合金導線成型工藝過程中擠壓、拉拔及退火等工序?qū)Ag0.1合金顯微組織、力學性能和電學性能的影響。結果表明：拉拔處理后TAg0.1合金的強度和硬度較擠壓態提高，但伸長率和電導率降低。經退火處理后，TAg0.1合金的強度和硬度值均減小，伸長率和電導率均增大。經擠壓、拉拔、中間退火、拉拔的工藝后，獲得的TAg0.1空心導線硬度值為129.7 HV0.05、抗拉強度為400 MPa、導電率為99.5% IACS。
關鍵字: 銅銀合金；顯微組織；力學性能；電學性能
（1. School of Material Science and Engineering, Shandong University, Jinan 250061, China;
2. Jinan Baoshida Industrial Development Co., Ltd, Jinan 250061, China）
Abstract:The microstructures of TAg0.1 alloys were characterized by optical microscopy and X-ray diffraction. The mechanical and electrical properties of TAg0.1 alloys were studied by microhardness tester, electronic universal testing machine and conductivity indicator. The influence of producing procedures, such as extraction, drawing and annealing, on the microstructure, mechanical properties and electrical properties of TAg0.1 alloys in the molding process of Cu-Ag alloy wire was analyzed systematically. The results indicate that the strength and hardness of TAg0.1 alloys increase after the drawing process, while the elongation and conductivity decrease. The elongation and conductivity of TAg0.1 alloys increase after annealing process, while the strength and hardness decrease. The TAg0.1 alloys were gotten after extraction, drawing, annealing and drawing processes. The hardness of TAg0.1 alloys is 129.7 HV0.05, the tensile strength is 400 MPa, and the electrical conductivity is 99.5% IACS.
Key words: Cu-Ag alloy; microstructure; mechanical property; electrical property
