中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 25 No. 5 May 2015 |
（1. School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China;
2. School of Materials Science and Engineering, Harbin University of Science and Technology, Harbin 150040, China）
Abstract:Powder metallurgy Ti-45Al-10Nb alloys was successfully fabricated by reactive sintering of milled powders at 1350 °C for 2 h in vacuum. The microstructure, in particular, constituent phases, grain size, precipitates of the product was investigated in detail. The results indicate that a double phase γ+α2 microstructure containing Ti2AlC precipitate is obtained under the sintering condition, and the alloy exhibits a fine and homogenous microstructure compared with traditional TiAl base. In fine grain structure, the average grain sizes for the γ and α2 phases are (2.3±0.05) and (5.6±0.05) μm, respectively. Additionally, numerous dislocations are observed in the alloy, and the dislocation density in γ phase is significantly higher than that in α2 phase. The formation mechanisms of the dislocation in the present alloy were also discussed in detail.
Key words: high Nb-TiAl alloy; powder metallurgy; microstructure; dislocation
