(1. 沈陽理工大學 材料科學與工程學院，沈陽 110159；
2. 中國科學院 金屬研究所，沈陽 110016)
摘 要: 通過對某公司原有TP2銅管三聯拉工藝進行延伸系數和變形量的計算，發現該工序變形量大、對管材質量的影響大，且尚有可優化空間。運用有限元分析軟件MSC.Marc對此工藝進行數值模擬研究，得出溫度和等效應力隨變形率、拉拔道次和拉拔速度變化的規律。對原有拉拔工藝中的變形溫度進行實驗測量，將實驗結果與有限元分析結果進行比較，驗證有限元模型與真實工藝的符合程度，為聯合拉拔工藝的合理改進提供理論依據，并以此為基礎提出優化工藝方案。綜合對比分析原有的拉拔工藝和優化的拉拔工藝，發現優化工藝增大了各道次的變形率，使得變形溫度有所提高，但等效應力的變化幅度較小，優化工藝方案切實可行。
關鍵字: 三聯拉工藝；溫度；等效應力；數值模擬；優化工藝
（1. School of Materials Science and Engineering, Shenyang Ligong University, Shenyang 110159, China;
2. Institute of Metals Research, Chinese Academy of Sciences, Shenyang 110016, China）
Abstract:The triple tube drawing process plays a significant role in large deformation and high-quality tube drawing program which can still be optimized when the elongation coefficient and deformation were computed depending on some company’s existing triple TP2 tube drawing process. The relationships among temperature, equivalent stress and deformation rate, drawing passes, drawing velocity were obtained by using the FEM software MSC.Marc. The optimized FEM model can stand for the real process, the deformation temperature of the original process was measured and contrasted with FEM result. The optimized process strategy was putted forward by the support of above mentioned analysis and corresponding theory. The optimized tube drawing process is proved to have a high pass-deformation rate which causes an apparent temperature rising, but exerts a little influence on the equivalent stress. Whatsmore, it is improved that the drawing process project is feasible.
Key words: triple drawing process; temperature; equivalent stress; numerical simulation; optimized process
