(中南大學 粉末冶金國家重點實驗室，長沙 410083)
摘 要: 通過連續升溫?zé)崤蛎浄ǚ治鯰i55531(Ti-5Mo-5Cr-5V-3Al-1Zr)合金在連續升溫過程中的熱膨脹行為、物相組成和顯微組織，繪制熱膨脹微分曲線。結果發現：隨著升溫速率的增加，相變溫度逐漸升高。其中，在1 ℃/min的升溫速率下不同溫度區間內的相變行為如下：低于192 ℃時，發生ωath→β轉變；192~347 ℃時，發生β→ωiso轉變；347~376 ℃時，發生ωiso→α+β、β→α轉變；409~648 ℃時，發生β→α轉變；648~831 ℃時，發生α→β轉變；831 ℃時，轉變?yōu)槿陆M織。計算得到α→β轉變熱激活能為188.04 kJ/mol。
關鍵字: Ti55531鈦合金；熱膨脹；相變序列；熱激活能
（State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China）
Abstract:The dilatometry behavior, phase composition and microstructure of Ti55531(Ti-5Mo-5Cr-5V-3Al-1Zr) alloy were investigated during continuous heating process, and the derivative of dilatometric curve was thereby calculated. The results show that the phase transformation temperature increases with accelerating heating rate. Consequently, phase transformation sequence of Ti55531 alloy at heating rate of 1℃/min is confirmed as follows: temperature below 192 ℃, ωath transforms β; 192-347 ℃, β transforms ωiso; 347-376 ℃, ωiso transforms α+β and β transforms α; 409-648 ℃, β transforms α; 648-831 ℃, α transforms β; over 831 ℃, full β. The activation energy value relating to α→β transformation in Ti55531 alloy is evaluated as 188.04 kJ/mol.
Key words: Ti55531 Ti alloy; dilatometry; phase transformation sequence; activation energy
