中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 24 No. 6 June 2014 |
（1. School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou 510006, China;
2. Kunshan Kedun Nano Coatings Tech. Co. Ltd., Suzhou 215000, China;
3. National Core Research Center for Hybrid Materials Solution, Pusan National University, Busan 609735, Korea）
Abstract:Using a closed field unbalanced magnetron sputtering system, the cemented carbide end mills were coated with a CrTiAlN hard coating, which consisted of a Cr adhesive layer, a CrN interlayer and a CrTiAlN top layer. The microstructure and mechanical properties of the coating were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), micro indentation and scratch test. The cutting performance of the coated end mills were conducted by high-speed dry milling hardened steel (P20, HRC 45). The results indicates that the coating is composed of (Cr,Ti,Al)N columnar grains with nanolayers. The coating exhibits good adhesion to cemented carbide substrate and high microhardness of around 30 GPa. The coated end mills show significant improvement on tool life and much lower cutting force as compared to the uncoated ones. And the related mechanisms were discussed.
Key words: CrTiAlN coating; high-speed machining; hardened steel; tool wear
