中國有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 24 No. 6 June 2014 |
（1. State Key Laboratory of Material Processing and Die and Mould Technology,
Huazhong University of Science and Technology, Wuhan 430074, China;
2. College of Materials Science and Engineering, Huazhong University of Science and Technology,
Wuhan 430074, China）
Abstract:Flow behavior of the Al-Si coated boron steel was investigated with Gleeble-3500, in comparison with the uncoated one. Effect of deformation conditions on the coating integrity was characterized by optical microscopy. Facture surfaces of the coated steels were inspected under SEM. Experimental results indicate that the ultimate tensile strength and ductility of the Al-Si coated boron steel are lower than those of the uncoated steel under test conditions. Extensive cracks occur in the coating after tensile tests; the width and density of cracks are sensitive to the deformation temperatures and strain rates. The bare substrate exposed between the separate coating segments is oxidized. Appearance of the oxide degrades the Al-Si coating adhesion. Remarkable difference between formability of the coating layer and the substrate is confirmed. The formability of the Al-Si coating could be optimized by controlling the phase transformation of the ductile Fe-rich intermetallic compounds within it during the austenization.
Key words: hot stamping; boron steel; oxidation; Al-Si coating; crack; formability
