中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 24 No. 4 April 2014 |
（1. State Key Laboratory of Complex Nonferrous Metal Resources Cleaning Utilization in
Yunnan Province/National Engineering Laboratory for Vacuum Metallurgy,
Kunming University of Science and Technology, Kunming 650093, China;
2. Yunnan Provincial Key Laboratory of Nonferrous Vacuum Metallurgy,
Kunming University of Science and Technology, Kunming 650093, China;
3. Engineering Research Center for Silicon Metallurgy and Silicon Materials of Yunnan Provincial Universities,
Kunming University of Science and Technology, Kunming 650093, China）
Abstract:Boron removal from metallurgical grade silicon (MG-Si) using a calcium silicate slag was studied. The results show that it is impossible basically to remove boron using a pure SiO2 refining. The oxidizing ability of CaO-SiO2 slag for boron removal was characterized by establishing the thermodynamic relationship between the distribution coefficient of boron (LB) and the activities of SiO2 and CaO. The experimental results show that the distribution coefficient and the removal efficiency of boron are greatly improved with the increase of CaO proportion in the slag. The maximal value of LB reaches 1.57 with a slag composition of 60%CaO-40%SiO2 (mass fraction). The boron content in the refined silicon is reduced from 18×10-6 to 1.8×10-6 using slag refining at 1600 °C for 3 h with a CaO-SiO2/MG-Si ratio of 2.5, and the removal efficiency of boron reaches 90%.
Key words: metallurgical grade silicon; boron removal; thermodynamics; distribution coefficient; slag refining
