中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 24 No. 4 April 2014 |
（1. School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China;
2. Department of Materials, North China Institute of Aerospace Engineering, Langfang 065000, China）
Abstract:The electronic packaging shell of high silicon carbide (54%SiC, volume fraction) aluminum-based composites was produced by liquid-solid separation technique. The characteristics of distribution and morphology of SiC as well as the shell’s fracture surface were examined by optical microscopy and scanning electron microscopy, and the thermo-physical and mechanical properties of the shell were also tested. The results show that Al matrix has a net-like structure while SiC is uniformly distributed in the Al matrix. The SiCp/Al composites have a low density of 2.93 g/cm3, and its relative density is 98.7%. Thermal conductivity of the composites is 175 W/(m·K), coefficient of thermal expansion (CTE) is 10.3×10-6 K-1 (25-400 °C), compressive strength is 496 MPa, bending strength is 404.5 MPa, and the main fracture mode is brittle fracture of SiC particles accompanied by ductile fracture of Al matrix．Its thermal conductivity is higher than that of Si/Al alloy, and its CTE matches with that of the chip material.
Key words: liquid-solid separation; near-net thixoforming; SiCp/Al electronic packaging shell; thermal conductivity; coefficient of thermal expansion
