(1. 湖南大學 材料科學與工程學院，長沙 410082；
2. 湖南大學 噴射沉積技術及應用湖南省重點實驗室，長沙 410082)
摘 要: 研究高應變速率軋制ZK60鎂合金板材在523~673 K、1×10-3~1×10-1 s-1初始應變速率下的超塑變形行為及其特征。研究發現：軋制態ZK60板材在648 K、1×10-3 s-1拉伸時，可獲得最大伸長率650%，應變速率敏感性指數高達0.53；在623 K、1×10-2 s-1拉伸時，可獲得伸長率584.5%，應變速率敏感性指數為0.47，呈現出較好的高應變速率超塑性。微觀組織與理論分析表明：ZK60合金板材在高應變速率下的超塑性變形過程中主要的變形機制為晶界滑移機制(GBS)，主要協調機制為晶界擴散控制的位錯蠕變，同時還伴有一定程度的液相輔助協調機制。
關鍵字: ZK60鎂合金；高應變速率超塑性；高應變速率軋制；細晶鎂合金
（1. College of Materials Science and Engineering, Hunan University, Changsha 410082, China;
2. Hunan Provincial Key Laboratory of Spray Deposition Technology and Application, Hunan University,
Changsha 410082, China）
Abstract:The superplastic deformation characteristics of the high strain rate rolling ZK60 magnesium alloys at temperature ranging from 523 K to 673 K and at an initial strain rates ranging from 1×10-3 s-1 to 1×10-1 s-1 were investigated. The results show that the maximum elongation to failure of 650% is obtained at 648 K and the strain rate of 1×10-3 s-1 in the as-rolled ZK60 magnesium alloys and its strain rate sensitivity (m) is high up to 0.53. An excellent high strain rate superplasticity with the elongation to failure of 584.5% is obtained at 623 K and the strain rate of 1×10-2 s-1 and its strain rate sensitivity (m) is 0.47. The microstructure and theoretical analysis shows that, at temperature above 573 K, the dominant deformation mechanism in high strain rate superplasticity is grain boundary sliding (GBS), which was studied systematically. The dislocation creep controlled by grain boundary diffusion was considered the main accommodation mechanism, and high strain rate superplasticity was also accompanied by a certain degree of inter-granular liquid phase aiding mechanism, which was observed.
Key words: ZK60 magnesium alloy; high strain rate superplasticity; high strain rate rolling; fined grain magnesium alloy
