Abstract:Porous TiNiCu ternary shape memory alloys (SMAs) were successfully fabricated by powder metallurgy method. The microstructure, martensitic transformation behavior, damping performance and mechanical properties of the fabricated alloys were intensively studied. It is found that the apparent density of alloys decreases with increasing the Cu content, the porous Ti₅₀Ni₄₀Cu₁₀ alloy exhibits wide endothermic and exothermic peaks arisen from the hysteresis of martensitic transformations, while the porous Ti₅₀Ni₃₀Cu₂₀ alloy shows much stronger and narrower endothermic and exothermic peaks owing to the B2-B19 transformation taking place easily. Moreover, the porous Ti₅₀Ni₄₀Cu₁₀ alloy shows a lower shape recovery rate than the porous Ti₅₀Ni₅₀ alloy, while the porous Ti₅₀Ni₃₀Cu₂₀ alloy behaves reversely. In addition, the damping capacity (or internal friction, IF) of the porous TiNiCu alloys increases with increasing the Cu content. The porous Ti₅₀Ni₃₀Cu₂₀ alloy has very high equivalent internal friction, with the maximum equivalent internal friction value five times higher than that of the porous Ti₅₀Ni₅₀ alloy.

Key words: porous TiNiCu alloys; powder metallurgy; martensitic transformation; damping behavior