中國有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 23 No. 6 June 2013 |
（1. National Engineering Research Center for Magnesium Alloys, Chongqing University, Chongqing 400044, China;2. College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China;3. Institute of System Engineering, China Academy of Engineering Physics, Mianyang 621900, China）
Abstract:The damping capacities of as-rolled Mg-3Cu-1Mn (CM31) alloy were studied by dynamic mechanical analyses. The internal friction in the first heating shows peaks P1, P2 and P3 at 118, 190, and 320 °C, respectively. The significant peak P3, which can not be found in the cast CM31 alloy, appears in the first heating Q-1 curve and disappears in the second heating Q-1 curve. The influence of rolling on the internal friction peaks of the CM31 alloy was investigated by optical microscopy, X-ray diffraction, and electron backscatter diffraction analyses. The results show that the textures are enhanced and the twins rapidly disappear while peak P3 appears after deformation of the CM31 alloy, and confirm that the three internal friction peaks are the dislocation damping peak, grain boundary damping peak, and the recrystallization peak caused by twins, in the as-rolled CM31 alloy.
Key words: rolling; magnesium alloys CM31; twinning; internal friction; damping capacity
