(東北大學 材料電磁過程研究教育部重點實驗室，沈陽 110819)
摘 要: 為了了解電磁場對組織細化作用的機理，采用低頻電磁鑄造方法制備直徑200 mm Al-Zn-Mg-Cu-Zr合金鑄錠，并對鑄造過程中的溫度場進行測量。結果表明：施加磁場產生的強制對流使得溫度場均勻且低于液相線約6 ℃。結晶器中熔體溫度場的變化顯著改變了熔體從開始澆注到完全凝固的熱歷史，從而有效促進了異質形核，顯著減少晶核的重熔，使更多晶核能夠生存下來，并最終促進形成均勻、細小的微觀組織。
關鍵字: Al-Zn-Mg-Cu-Zr合金；低頻電磁鑄造；溫度場；晶粒細化；細化機理
（Key Laboratory of Electromagnetic Processing of Materials, Ministry of Education,
Northeastern University, Shenyang 110819, China）
Abstract:In order to understand the mechanism of grain refinement achieved by electromagnetic field, ingots of an Al-Zn-Mg-Cu-Zr alloy with diameter of 200 mm were cast and the temperature field was measured during the casting process. The results show that the electromagnetic field can induce the forced convection, leading to a quite uniform temperature field and a low temperature (6 ℃ bellow the liquidus). Therefore, the thermal history of the melt from pouring to being solidified is changed obviously, resulting in an enhanced heterogeneous nucleation and remarkable decrease of the remelting of the formed nuclei and the formation of fine and uniform spherical equiaxed microstructure.
Key words: Al-Zn-Mg-Cu-Zr alloy; low frequency electromagnetic casting; temperature field; grain refinement; refinement mechanism
