(1. 常州大學 先進金屬材料常州市重點實驗室，常州 213164；
2. 常州大學 江蘇省油氣儲運技術重點實驗室，常州 213016；
3. 湘潭大學 材料設計及制備技術湖南省重點實驗室，湘潭 411105)
摘 要: 通過熱浸鍍和擴散偶試驗研究鐵基與4種鋅鋁熔池成分合金Zn-0.2%Al、Zn-5%Al、Zn-25%Al、Zn-55%Al(質量分?jǐn)?shù))之間的界面反應過程，提出熱浸鍍鋅鋁中擴散通道移動對合金層形成的控制機理。結果表明：熱浸鍍(擴散偶)初期，擴散通道均沿兩相區共軛線(tie-line)穿過熔池成分液相與對應的Fe-Al化合物構成的兩相區，鐵基表面優先形成對應的Fe-Al化合物的連續層狀組織。隨著熱浸鍍(擴散)時間的延長，擴散通道具有逐漸向兩擴散組元成分點連線移動的趨勢，一旦擴散通道切割熔池成分液相與對應的Fe-Al化合物構成的兩相區共軛線，初期形成的Fe-Al化合物層失穩破裂，導致鍍層合金層(擴散層)快速增厚。
關鍵字: 熱浸鍍鋅鋁；擴散偶；Zn-Fe-Al體系；界面反應；擴散通道
（1. Key Laboratory of Advanced Metal Materials of Changzhou City, Changzhou University, Changzhou 213164, China;
2. Key Laboratory of Oil and Gas Storage and Transportation Technology of Jiangsu Province,
Changzhou University, Changzhou 213016, China;
3. Key Laboratory of Materials Design and Preparation Technology of Hunan Province, Xiangtan University,
Xiangtan 411105, China）
Abstract:By galvanizing and diffusion couple experiments, the interface reactions between the iron-base and different baths, which are Zn-0.2%Al, Zn-5%Al, Zn-25%Al and Zn-55%Al (mass fraction), were studied, respectively. The controlled mechanism of alloy layer formation in the process of galvanizing by the diffusion path change was proposed. The results show that in the beginning of galvanizing (diffusion couple), the diffusion path crosses the two-phase region of melting bath point composition and the relevant Fe-Al compound following its tie-line, the Fe-Al compound forms on the iron-based surface firstly. With the immersion (diffusion) time increasing, the diffusion path trends to move gradually to the line connecting with two diffusion component points. Once the diffusion path cuts the tie-line of the two-phase region of melting bath and the relevant Fe-Al compound, the first Fe-Al compound layer is steadiness losing and breaking, which makes the thickness of coating alloy layer (diffusion layer) increase rapidly.
Key words: hot-dipping Zn-Al; diffusion couple; Zn-Fe-Al system; interface reaction; diffusion path
