(西北工業大學 航空學院，西安 710072)
摘 要: 利用電子萬能實驗機對超細晶銅(UFG-Cu)進行溫度范圍為77~573 K的準靜態壓縮實驗(應變率為1×10−3 s−1)，研究溫度對材料流動應力和應變硬化行為的影響。結果表明：與退火粗晶銅相比，超細晶銅在壓縮過程中的流動應力顯著增大，但是由于材料的位錯密度已經飽和，其應變硬化能力卻幾乎喪失，應變硬化率對應變和溫度的依賴性也顯著低于退火粗晶銅的；同時，由于晶粒細化導致材料的激活體積減小，超細晶銅的流動應力對溫度的敏感性與粗晶銅相比，顯著增大。
關鍵字: 超細晶銅；力學性能；應變硬化；溫度敏感性；激活體積
different temperatures
（School of Aeronautics, Northwestern Polytechnical University, Xi’an 710072, China）
Abstract:The quasi-static compression experiments of the annealed coarse-grained copper (CG-Cu) and ultrafine-grained copper (UFG-Cu) were performed at temperatures of 77−573 K and strain rate of 10−3 s−1. The results show that, although UFG-Cu displays extremely high flow stress, the ability of strain hardening almost disappears due to the saturation of dislocation density. The sensitivity of strain hardening rate to strain level and temperature is observed to be lower than those of its coarse counterpart. At the same time, the reduction in activation volume due to the grain refinement is the main reason for the enhanced temperature sensitivity of UFG-Cu.
Key words: ultrafine-grained copper; mechanical behavior; strain hardening; temperature sensitivity; activation volume
