(中南工業大學非平衡材料科學與工程研究所，長沙410083)
摘 要: 采用多層噴射共沉積工藝制備6066鋁合金/15%SiC顆粒復合材料，得到了增強顆粒分布均勻、增強顆粒與基體界面潔凈、基體冷凝速度高的沉積坯，沉積坯經擠壓后進行T6狀態處理，其力學性能為σb= 640 M Pa， σ0.2=510 MPa， E= 133 GPa，δ= 9. 4%。
關鍵字: 6066鋁合金 碳化硅顆粒 噴射沉積 復合材料
SPRAY CO-DEPOSITION
（Non-Equilibrium Material Research Institute,
Central South University of Technology, Changsha 410083）
Abstract:6066Al/SiCpcomposites were developed by multi-layer spray co-deposition technology. The deposition preforms with high cooling rate were prepared. In the deposition preforms, the distribution of the reinforcing particulates is homogeneous and the interface between the reinforcing phase and the matrix is clean. After extrusion and T6 heat treatment, the materials show mechanical properties as:σb=640 MPa,σ0.2=510 MPa,E=133 GPa,δ=9.4%.
Key words: 6066 Al alloy SiC particulates spray co-deposition composites
