文章編號：(1996)04-50-4
石墨及其混合物料的磨礦動力學行為①
田金星
(武漢工業大學資環系，武漢430070)
摘 要: 借助于分批磨礦動力學模型，分別研究了鱗片石墨磨礦及其作為混合物料的一個組分參與磨礦時的動力學行為。結果表明:不管是天然鱗片石墨組分還是混合物料總體，其磨礦動力學行為均是非線性的。只有鱗片石墨在單獨磨礦時，其動力學行為才是線性的。初步分析了這一變化產生的原因，同時研究了石墨單獨磨礦的碎裂參數特性。
關鍵字: 石墨 磨礦動力學 碎裂函數
THE GRINDING KINETIC BEHAVIORS
OF GRAPHITE AND ITS MIXTURE
OF GRAPHITE AND ITS MIXTURE
Tian Jinxing
（Department of Mineral Resource and Environment Engineering,
Wuhan University of Technology , Wuhan 430070）
Abstract:The results showed the grinding kinetic behaviors of bulk mixture and its graphite component are nonlinear while the grinding kinetic behavior of pure graphite is linear, the cause of which was analysed. The fracturing parameter properties of grinding of pure graphite were also studied.
Key words: graphite grinding kinetic behavior fracturing parameter
