(上海交通大學材料工程系，上海200030)
摘 要: 對用低壓浸滲法制備石墨(碳)長纖維鎂基復合材料進行了研究。結果表明，制備工藝條件對復合狀況、界面反應及復合材料性能均有明顯影響。通過纖維表面SiO2涂層處理和優化浸滲工藝，可成功地制備出高性能的復合材料，拉伸斷裂強度可達509 MPa，模量亦可達142 GPa。
關鍵字: 低壓浸滲 纖維增強 界面反應 金屬基復合材料
LOW-PRESSURE INFILTRATION
（Department of Materials Science and Engineering,
ShanghaiJiao Tong University, Shanghai200030）
Abstract:Gr(C)/Mg composites were prepared by low-pressure infiltration. Results showed that the infiltration, interface reaction and tensile stress of composite materials were affected obviously by fabrication conditions. Through fiber SiO2coating and optimum infiltration processing, composite materials with high mechanical properties were produced. Its tensile strength was as high as 509 MPa and modulus of elasticity 142 GPa.
Key words: low-pressure infiltration fibre reinforcement interface reaction Gr(C)/Mg composites
