(西南交通大學, 成都 610031)
摘 要: 對LD10鋁合金加工后的去應力處理工藝的殘余應力用小孔釋放法進行了測試, 對不同熱處理工藝和加工后的去應力處理工藝對殘余應力的影響進行了分析。結果表明：加工以后使應力重新分布和使殘余應力降低或均勻化，冷熱循環去應力處理效果很小。
關鍵字: 鋁合金 加工 去應力處理 殘余應力
（Southwest Jiaotong University, Chengdu 610031）
Abstract:The test of residual stress of stress-relief treatment after machining with the small hole releasing way was carried out and the effect of different heat-treated and stress-relief technique after machining on residual stress was analyzed. The results indicated that after machining the stress is re-arranged and the residual stress decreases; the effect of thermal cycle stress-relief-treatment is little.
Key words: alloy-aluminium machining stress-relief treatment residual stress
