(1.鄭州工業大學材料科學與工程系，鄭州 450002;
2.北京科技大學材料科學與工程學院，北京100083)
摘 要: 利用示差掃描量熱儀(DSC)分析方法，研究了快凝 Al-Fe-(Cr，Mo)-Si合金中準晶相的轉變動力學特征。結果表明：采用Jeziorny 數學模型對準晶相的轉變非等溫DSC曲線進行分析，其轉變動力學特征參數表征的物理意義與透射電鏡(TEM)的分析結果基本一致。因此，建立了宏觀分析與微觀顯微組織之間的內在聯系。
關鍵字: 快速凝固 準晶相 DSC 轉變動力學
（1.School of Materials Science and Engineering,
Zhengzhou Univer sity of Technology, Zhengzhou 450002
2.School of Materials Science and Engineering,
University of Science and Technology Beijing, Beijing 100083）
Abstract:Differential Scanning Calorimetry (DSC) was used to study kinetic charateristics of transformation on quasicrystalline phases in a rapidly solidified Al-Fe-(Cr, Mo)-Si alloy. It is shown that the description of kinetic parameters on transformation of quasicrystalline phases is basically consistent with the results of TEM analysis, by analysing the non-isothermal DSC curves of quasicrystalline phases transformation by Jeziorny's mathematical model. Therefore, the internal relations between kinetic parameters and microstructures of materials have been built up.
Key words: rapid solidification quasicrystalline phase DSC kinetics of transformation
