(中南工業大學粉末冶金國家重點實驗室, 長沙 410083)
摘 要: 用熱物性綜合測試儀測定了不同熱處理溫度下C/C復合材料的導熱系數，通過X射線衍射石墨化度的測定及晶粒尺寸計算，分析了材料的材質。進一步討論了熱處理溫度、石墨化度與導熱系數之間的關系。表明試樣中存在性質不同的3個組元，隨熱處理溫度的升高，平行于碳纖維長向的導熱系數值從2200℃的147 W/m·K升高到2800 ℃的180 W/m·K左右， 而垂直方 向從相應的49W/m·K升高到70 W/m·K。
關鍵字: C/C復合材料 導熱系數 石墨化度
（National Key Laboratory for Powder Metallurgy,
Central South University of Technology, Changsha 410083）
Abstract:Thermal conductivity values of C/C composite were obtained with comprehensive measurement apparatus of thermal physical properties under different heat treatment temperatures. The material quality was analyzed through measurement of degree of graphitization with XRD and calculation of microcrystal sizes. Furthermore, the relationship among heat treatment temperature, degree of graphitization and thermal conductivity was discussed.
Key words:
