(1.中南工業大學材料科學與工程系，長沙 410083;
2.柳州華錫集團公司，柳州 545005)
摘 要: 將Sn和In先熔煉成合金，然后通過氣霧噴粉工藝，由高壓富氧氣體使合金熔體霧化成微細的金屬霧滴，并隨即在燃燒道中直接氧化燃燒而生成SnO2/In2O3納米級復合的陶瓷粉末，其粒度≤25nm。
關鍵字: 液霧氧化燃燒 納米粉末 SnO2 In2O3
（1.Department of Materials Science and Engineering,
Central South University of Technology, Changsha 410083 ;
2.Liuzhou Huaxi Company, Liuzhou 545005）
Abstract:After Sn and In being smelted an alloy, the superheated alloy is atomized into fine melted droplets by a nozzle, and the oxy-burning reaction occurs in burning tower immediately. Because oxygen content in the atomizing gas is very high, oxy-burning reaction is very intense, so the size of SnO2/In2O3 nano-size powder prepared is less than 25nm.
Key words: atomizing-combustion nano-sized powder SnO2 In2O3
