(北京科技大學固體電解質冶金測試技術國家專業實驗室，北京 100083)
摘 要: 以ZrO2(MgO)為固體電解質、(MgO+MgFe2O4)為輔助電極材料組成的測定熔融高冰鎳中鐵含量的電化學傳感器，其電池式為：Mo, MoO2｜ZrO2(MgO)｜MgO+ MgFe2O4｜[Fe]matte, Mo。傳感器在鐵含量小于6.2%(質量 )的范圍內測得的數值與化學分析值基本一致。介紹了溫度在1483～1560K之間, 融體組成一定時，傳感器電動勢與溫度的 關系，并據此得出了鐵活度系數與溫度的關系式，最后給出了由傳感器電動勢計算高冰鎳中鐵的質量百分含量的公式。
關鍵字: 鎳熔锍 鐵傳感器 固體電解質
（）
Abstract:An electrochemical Fe sensor with ZrO2(MgO) solid electrolyte and (MgFe2O4+MgO) auxiliary electrode material as the following formula has been developed: Mo, MoO2｜ZrO2(MgO)｜MgFe2O4+MgO｜[Fe]matte, Mo. The performances and measuring range of the sensor in matte were studied. The calculating equations of activity, activity coefficient and content of Fe in nickel matte were obtained from experimental data. The sensor was submitted to control the blowing end-point of ferro in converter process. During such in-plant tests it was confirmed that the stability of the sensor is excellent and it facilitates more accurate control of Fe contents at the blowing end-point of nickel matte.
Key words: nickel matte Fe sensor solid electrolyte
