(1.福州大學材料研究所， 福州 350002;
2.福建省冶金工業研究所，福州 350011)
摘 要: 采用溶膠-凝膠工藝制備了Ti-17%Si 鈦硅二元氧化物納米材料，利用掃描差熱 (DTA)、紅外光譜(IR)、X射線衍射(XRD)和透射電子顯微鏡(TEM)等分析方法研究了其組織結構特點，并與含鈦單元系相比較，結果表明，Si元素的添加穩定了銳鈦礦相結構， 也使得產物的納米尺度變得更為細小。
關鍵字: TiO2 納米材料 Si 溶膠凝膠
（1.Institute for Materials Research, Fuzhou University, Fuzhou 350002 ;
2.Fujian Research Institute of Metallurgical Industry, Fuzhou 350011）
Abstract:Ti-17% Si binary oxide nano-materials were prapared by a Sol-gel technique. The morphologies and structures of the materials were studied by DTA, IR, XRD and TEM. After comparing with the monobasic oxide , the results indicated that the adding of Si element makes the anatase structure stabler and the nanocrystal finer.
Key words: TiO2 nano-materials Si Sol-gel
